Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Roofing: The Walnut Creek Owner’s Guide
Cambridge Pavers roofing repair in Walnut Creek typically runs $400-$1,800 for most part replacements, with full roof replacements on Cambridge Pavers systems starting at $8,000. We stock Cambridge Pavers-compatible membrane, flashing, and drainage components for same-day installation on most calls. Most Walnut Creek owners discover a problem when water stains appear on ceiling drywall beneath a paver terrace or when pavers along the roof edge start lifting after the freeze-thaw cycles we get in the Saranap and Lakewood hills microclimates.
Which Cambridge Pavers Models This Applies To
Cambridge Pavers produces three product lines that integrate with roofing assemblies: the ArmorTec residential pavers, the Permeable Series for stormwater management, and the Wall Systems that tie into roof-edge flashing. The critical compatibility point is the paver thickness - ArmorTec runs 60mm to 80mm, while Permeable Series pavers sit at 80mm standard - because this determines the flashing height and membrane overlap at the roof-to-paver transition.
To identify your part, look for the stamped production code on the paver edge: Cambridge Pavers marks month and year (e.g., “03-19” for March 2019) plus the series abbreviation. OEM membrane and flashing from Cambridge Pavers carries a 10-year material warranty, though we’ve found comparable SBS-modified bitumen membrane from GAF and Owens Corning performs identically in Walnut Creek’s climate at lower material cost. We quote both options in writing so you see the number before anyone picks up a tool.
Signs Your Cambridge Pavers Roofing Is Failing

- Water stains on interior ceilings below paver terraces. This usually means the waterproof membrane beneath the paver bed has cracked at a seam or penetration. Cambridge Pavers systems rely on a continuous membrane layer, and once it breaches, water travels laterally before dropping.
- Pavers lifting or rocking at the roof perimeter. The bedding sand has washed out, often because the roof-edge flashing was installed too low or the weep screed (the perforated drainage strip) has clogged with organic debris from Walnut Creek’s oak canopy.
- Efflorescence blooming on paver faces. White mineral deposits signal moisture is migrating upward through the paver bed instead of draining through the membrane. In Contra Costa County’s clay-heavy soils, this accelerates when the drainage mat beneath the pavers degrades.
- Soft spots or sagging in the paver field. The structural substrate - typically a concrete deck or plywood over framing - has absorbed moisture and begun to delaminate. This is past the point of part replacement; the assembly needs partial demolition.
- Flashing pulling away from wall junctions. Thermal expansion in Walnut Creek’s 100°F summer-to-40°F winter swing cycles fatigues the metal. Cambridge Pavers specifies 26-gauge galvanized or 16-ounce copper; we’ve found copper outlasts galvanized by 8-12 years in this climate.
Before
AfterReplacement Cost & What’s Included
| Service | Price Range (Walnut Creek) | What’s Included |
|---|---|---|
| Membrane patch/repair | $400-$900 | Localized membrane removal, substrate prep, new SBS-modified bitumen layer, paver reset |
| Flashing replacement (linear) | $600-$1,400 | Old flashing removal, wall preparation, new copper or galvanized installed, sealant, paver edge restoration |
| Drainage mat/weeper replacement | $800-$1,800 | Paver lift, old mat removal, new geocomposite drain installed, bedding sand refresh, paver relay |
| Full roof replacement (Cambridge Pavers system) | $8,000-$20,000 | Complete tear-off, deck inspection/repair, new membrane, flashing, drainage, paver reinstall or new |
The range depends on three factors: how much of the assembly we must lift to reach the failed component, whether the substrate needs repair, and whether you want OEM Cambridge Pavers parts or the equivalent we source through our fifty-plus vetted brand relationships. Under Clause 1 of the Haven Standard, the written price covers everything in the scope - no change proceeds without a signed change order, which is why our projects finish within a few percent of the number you agreed to.
DIY or Call Us?

Here’s what you can safely check yourself: walk the paver field and note any rocking, staining, or lifted edges; clear debris from weep screed openings with a garden hose (low pressure); and photograph any interior water stains with a date stamp. These observations help us diagnose before we arrive.
What you should not attempt: lifting pavers to inspect membrane condition, cutting or peeling back membrane layers, or resealing flashing joints. The membrane is your waterproof barrier; one torn seam converts a $600 repair into a $4,000 replacement. And working at roof height with loose pavers underfoot is genuinely dangerous - the pavers shift, the bedding sand gives, and the fall risk is real. We carry Cambridge Pavers-compatible membrane, flashing, and drainage components on our trucks, and our crews are background-checked and uniformed with a documented photo record on every visit. Call (510) 686-6370 to schedule your free estimate.
FAQs
The membrane beneath Cambridge Pavers typically lasts 15-20 years in Contra Costa County’s climate, though we’ve replaced membranes at 12 years on north-facing terraces where moisture lingers, and seen 25 years on well-drained south exposures. The pavers themselves outlast multiple membrane cycles - they’re concrete, not the failure point. Call (510) 686-6370 for an exact quote - estimates are free.
Localized patching works if the damage is under 10% of the total membrane area and the substrate is dry. We cut back to sound membrane, overlap-seam new material, and flood-test before resetting pavers. If the substrate is saturated or multiple seams have failed, partial or full replacement is the honest recommendation - patching over wet substrate guarantees callbacks. Call (510) 686-6370 for an exact quote - estimates are free.
Most membrane patches and flashing replacements finish in one day; drainage mat work runs one to two days depending on paver quantity. We don’t promise speed we can’t document - the crew photographs each layer as it’s exposed, and you get that record before we close. Call (510) 686-6370 for an exact quote - estimates are free.
We stock SBS-modified bitumen membrane in standard widths, copper and galvanized flashing in common profiles, and geocomposite drainage mat - all Cambridge Pavers-compatible by specification. For color-matched paver replacement, we order from Cambridge Pavers’ New Jersey distribution with typical 5-7 day freight to Walnut Creek. We quote both the repair-only and the full-color-match options in writing so you decide with the number in front of you. Call (510) 686-6370 for an exact quote - estimates are free.
Rowan Construction Group Walnut Creek is an independent service provider and is not affiliated with Cambridge Pavers. We also stock and install parts for KraftMaid, Cambria, and Silestone products.
Measure twice, document once, then we build. That’s how Grant Rowan has run every job since he started picking up framing hammers in the hills above Sunset, and it’s how we still operate across Contra Costa County - including the gut-renovation projects we’ve completed in Walnut Creek’s Saranap neighborhood where the framing closes square and the finishes hold up past the first inspection.
Written by Grant Rowan, Owner, Rowan Construction Group Walnut Creek at Rowan Construction Group Walnut Creek, serving Walnut Creek and nearby areas.







Before
After
Before
After
Before
After