Boral Windows & Doors Nationwide

Boral Windows & Doors: The Walnut Creek Owner’s Guide

We stock and install Boral-compatible window and door replacement units in Walnut Creek, with typical installed pricing running $4,500-$15,000 for full window replacement and $8,000-$25,000 for impact-rated systems. Most Boral parts we carry are available same-day from our Contra Costa County warehouse, and we measure, quote, and schedule before any work starts. Walnut Creek homeowners usually discover a failing Boral unit when they notice drafts around the frame, difficulty latching, or visible seal degradation after one of our dry summers followed by winter rains.

Call (510) 686-6370

Which Boral Models This Applies To

Boral’s window and door catalog spans several series, and matching the right replacement part requires reading the manufacturer’s label, not guessing from appearance. Look for the Boral series designation on the hinge side of operable windows or the top edge of sliding door panels; common lines include the Boral 100 Series, 300 Series, and the commercial-grade Boral ProLine systems. The 100 Series uses a narrower 2-5/8 inch frame depth, while the 300 Series and ProLine step up to 3-1/4 inch and carry heavier weatherstripping profiles that are not interchangeable.

We source OEM Boral components where the series is still in production, and we vet aftermarket equivalents from Quanex and Amesbury for discontinued lines. The aftermarket decision depends on whether your unit needs a matching exterior finish; Boral’s proprietary color formulations, particularly the earth-tone palette popular in Walnut Creek’s Saranap and Lakewood neighborhoods, often require factory-matched OEM sashes to avoid a two-tone appearance from the curb. If the failure is mechanical, a hardware-only replacement from our stock usually solves it without touching the frame.

Signs Your Boral Windows & Doors Is Failing

• Visible moisture between glass panes. This means the insulated glass unit (IGU) seal has failed, allowing argon gas to escape and atmospheric moisture to enter. In Walnut Creek, where summer temperatures regularly reach the mid-90s, the thermal expansion accelerates seal fatigue compared to cooler coastal climates.
• Difficulty opening, closing, or latching. The operating hardware, rollers, or hinges have worn or the frame has settled out of square. We see this most often in Boral sliding patio doors installed on homes built in the 1980s and 1990s around the Rudgear Park area, where soil movement is more pronounced.
• Drafts or temperature stratification near the unit. Weatherstripping has compressed or torn, or the sash no longer seats fully into the frame. The felt-pile weatherstripping Boral used in pre-2010 units typically lasts 8-12 years in California’s UV exposure before hardening.
• Condensation or mold on interior trim. This indicates air leakage past the unit, not interior humidity; the dew point is being reached on the inside surface because outside air is reaching the interior frame. Left unaddressed, this damages drywall and trim in Walnut Creek’s older ranch-style homes with limited exterior overhangs.
• Exterior frame rot or water staining. The weep system, the small drainage channels at the sill, is clogged or the sill pan was omitted during original installation. Boral’s vinyl and aluminum frames resist rot, but the surrounding wood buck can deteriorate if water is trapped against it through repeated seasons.

Before

After

Replacement Cost & What’s Included

For Boral window and door replacement in Walnut Creek, our installed pricing falls within the ranges below. Every quote is a flat written price with a written scope; under Clause 1 of the Haven Standard, no work starts until you have both in hand.

What drives the range: unit size, series specification, exterior finish matching, and whether the surrounding frame or sill pan needs repair. Our price includes removal and disposal of the old unit, installation of the replacement, interior and exterior trim touch-up, and a documented photo record of the completed work. The 365-Day Done Right Promise covers the installation; manufacturer warranties on the Boral or equivalent unit pass through to you unchanged.

DIY or Call Us?

There is safe owner inspection and there is work that belongs to a trained crew. You can check the Boral label location, clear weep holes with a pipe cleaner, and verify that weatherstripping is seated in its channel. Do not attempt to remove or replace an insulated glass unit yourself; the IGU is under vacuum pressure, the sash is heavy, and improper handling can shatter the glass or compromise the argon fill. For operating hardware, the issue is often not the part but the adjustment; Boral’s multi-point locking systems require specific sequencing to avoid binding the mechanism.

We carry Boral-compatible hardware, weatherstripping, and select sash sizes on our Walnut Creek service trucks. Call (510) 686-6370 and we’ll confirm whether your part is in stock, schedule a no-charge measurement visit, and deliver a written price before any work starts. Measure twice, document once, then we build.

FAQs